ENG - 9
•
All slave units must be connected one by one. For example, after Host is connected, press
GROUP
PLAY
button on slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and
slave 3 one by one sequentially.
•
While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth
connection is disabled.
•
Bluetooth devices can search and connect with the host Party Audio only.
•
When in Group Play mode, the slaves cannot connect to a Bluetooth device.
•
If you power off and then power on the Party Audio or select any source other than
BT
on a slave
unit, in Group Play mode, the Group Play mode is disconnected.
•
This product does not support aptX audio stream with Wireless Group Play mode.
Disconnecting the wireless Group Play mode
1.
Press and hold the
GROUP PLAY
button over 5 seconds (Host or Slaves) after Group Play is
connected or press the
GROUP PLAY
button (Host or Slaves) before Group Play is connected.
•
“
OFF-GROUP PLAY
” appears on the display and the LED above the
GROUP PLAY
button is off.
2.
If you select any source other than
BT
on the slave units or turn off the host Party Audio, the Group
Play mode is disconnected.
•
If the disconnection is made from the host Party Audio, Group Play is disconnected.
LED Indications
LED
STATE
Description
Green
Blink
Waiting for a wireless Group Play connection.
Solid
The wireless Group Play connection was successful.
Red
Solid
There is an error with the wireless Group Play connection.