Getting Started
Rear Panel
1
RADIO Antenna Terminals
1.
Connect the FM antenna to the FM
antenna connector terminal.
2.
Slowly move the antenna wire until you find
a location where reception is good, then
fasten it to a wall or other rigid surface.
2
AUX IN 2 Terminals
1.
Use an Audio Cable (not supplied) to
connect AUX IN 2 on the main unit to
Audio Out on an external analog output
device.
• Be sure to match connector colors.
• If the external analog output device has
only one Audio Out jack, connect either
left or right.
• Press the
AUX 1/2
button to select
AUX 2.
• If the product is in AUX mode for more
than eight hours and no buttons on the
front panel or remote are pushed, the
system will turn off.
3
AUX IN 1 Terminals
1.
Use to connect an external device
such as an MP3 player.
• Connect AUX IN 1 on the rear panel
of the main unit to the Audio Out of an
external device/MP3 player.
• Press the
AUX 1/2
button to select
AUX1.
4
LED Terminals for Speaker Beat
Waving.
5
ONLY FOR SERVICE
• This jack is for testing only. Please do
not use.
6
2.2 CH Speaker Terminals
1.
To achieve the correct sound quality,
when you connect the speakers, match
the color of the speaker plugs to the
color of the speaker jacks. See below.
• LEFT channel (marked
, White/Purple).
• RIGHT channel (marked
, Red/Purple).
• Don't force the Purple SUBWOOFER
connector into the White or Red speaker
jack.
7
Cooling fan
• The fan operates while the unit is
powered on.
If you set the unit to the minimum
volume, the fan won't operate.
Secure a minimum 6 inches (15 cm) of
clear space on all sides of the fan when
installing the main unit.
8
POWER
• Insert only the provided power cable.
8
English
1
34
6
8
7
2
5
MX-JS8000-ZC_ENG-0412.indd 8
MX-JS8000-ZC_ENG-0412.indd 8
2016-04-12 10:16:38
2016-04-12 10:16:38
