30
English
Basic Functions
English
31
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
Switch the system on by pressing the
1.
POWER
(
) button.
Press and hold
2.
TIMER/CLOCK
button and
then press the
ENTER
button.
Result: "CLOCK" is displayed.
Press ENTER.
3.
Result: The hour flashes.
Decrease the hours:
`
_
Increase the hours:
`
+
When the correct hour is displayed, press
4.
ENTER.
Result: The minutes flashes.
Decrease the minutes:
`
_
Increase the minutes:
`
+
When the correct minute is displayed, press
5.
ENTER.
Result: "TIMER" appears in the display.
The current time is now set.
`
NOTE
✎
You can display the time, even when you are using another
`
function, by pressing and hold the
TIMER/CLOCK
button
once.
You can also use
`
[
or
]
on the front panel instead of
buttons in step 3,4.
timer function
The timer enables you to switch the system on or off
at specific times automatically.
Before setting the timer, check that the current time
`
is correct.
`
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
If you no longer want the system to be switched on
`
or off automatically, you must cancel the timer.
Example: You wish to wake up to music every morning.
Switch the system on by pressing the
1.
POWER
(
) button.
Press and hold the
2.
TIMER/CLOCK
button and
then press
_
or
+
buttons until
TIMER
is
displayed.
Press the
3.
ENTER (
)
button.
Result:
ON TIME
is displayed for a few seconds, you
can set the timer switch-on time.
Set the timer switch-on time.
4.
a
Press the
_
or
+
button.
b
Press the
ENTER (
)
button.
Result: The minutes flash.
c
Press the
_
or
+
button.
d
Press the
ENTER (
)
button.
Result:
OFF TIME
is displayed for a few seconds,
you can now set the timer switch-off time.
Set the timer switch-off time.
5.
a
Press the
_
or
+
button.
b
Press the
ENTER (
)
button.
Result: The minutes flash.
c
Press the
_
or
+
button.
d
Press the
ENTER (
)
button.
Result:
VOL XX
is displayed, where
XX
corresponds to the volume already set.
Press
6.
_
or
+
button to adjust the volume level
and press the
ENTER (
)
button.
Result: The source to be selected is displayed.
Press the
7.
_
or
+
button to select the desired
source to be played when the system switches on.
FM/AM (radio) :
`
a
Press the
ENTER (
)
button.
b
Select a preset station by press
the
_
or
+
button.
DVD/CD (compact disc):
`
Load one compact disc.
USB : Connect the USB device.
`
MX-D730D-D750D-ENG-ipod-0215.indd 30
2011-4-13 9:28:47
`
may require an additional step to be activated depending
on the disc (or device). So it is better for you to select the
tuner function instead.
✎
If the auto timer is turned on, the DVD/CD or USB function
