Samsung MWR-WE13N, Quick Reference Technical Handbook

Page: 11 / 83

11
MWR-WG00JN
Tracking Your Indoor Unit from the Wired Remote Controller
Tracking of your Wired Remote Controller will automatically start when you turn on the power after
installation.
If you want to perform tracking again after installation, then press the and buttons at the
same time for more than 5 seconds.
The system will reset, and tracking will start again.
During tracking, the total number of currently searched indoor units and ventilator(ERV) will be
displayed.
NOTE
The operation displays on the remote controller may differ depending on the selected language.
If you want to perform tracking again after installation, then press the LEFT and SETTINGS buttons at
the same time for more than 5 seconds.
Initializing Your Wired Remote Controller Communication
Wired remote controller must be initialized if installation status changes.
Changing number of ventilator (ERV)/indoor unit or their address
Press the buttons at the same time for more than 5 seconds.
Your Wired Remote Controller will be initialized, and the device will search for the indoor units/
ventilator(ERV) connected to your Wired Remote Controller again.