9
ENGLISH
Classifi cation
Button
Function
Air
conditioner
related
information
⑨
Away / Motion detect
sensor button
Selects when no one is detected in an indoor area, when the air
conditioner needs to be turned off automatically, when the AWAY
operation is set;
⑩
Outdoor air intake
Selects the MINI AHU indoor unit Outdoor intake function
⑪
Humidity button
Turns the MINI AHU indoor unit humidifying function On/Off
Special
function
displays
⑫
Schedule Button
Selects the schedule setting function
⑬
User Set Button
Selects the detailed setting function
⑭
Delete button
Cancels the schedule setting
⑮
ESC button
Returns to general mode from schedule and detailed setting
screens
⑯
Navigational buttons
Moves between items or change the item value
⑰
Set button
Saves your new settings
⑱
kWh button
Displays the amount of the power consumption
⑲
Filter Reset button
Turns off the filter cleaning displays (filter using time reset)
⑳
S-Plasma Ion button
Selects the S-Plasma Ion function
Ventilator
(ERV)
related
buttons
Operation On/Off
button
Turns the Ventilator(ERV) On/Off
Mode button
Selects the desired operation for the Ventilator(ERV)
Fan speed button
Changes the fan speed for your Ventilator(ERV)
E.Saver button
Starts Energy Saving Operation
Clean up button
Selects air purification through the in/out load controls
• After cleaning the fi lter, please press the
Filter Reset
button. The
lamp will turn off , and it will
be turned on again upon the next cleaning period.
• If you press a functional button not supported by the indoor unit, then the
lamp will
turn on.
• If the temperature display setting is set to indoor temperature and you press the
Room Temp.
button, the
lamp display will appear. (When you install the Wired Remote Controller, the
setting is available.)
• If you press the
On/Off
button when your Ventilator(ERV) is connected to a Wired Remote
Controller, then the air conditioner and the Ventilator(ERV) might operate or stop at the same
time or only the air conditioner might operate or stop. The factory setting is set to simultaneous
operation/stop. (When you install the Wired Remote Controller, the setting is available.)
• Although the air conditioner and the Ventilator(ERV) are set to simultaneous operation/stop,
you can individually control the air conditioner and the Ventilator(ERV) by using another controller
(e.g. wireless remote controller, central controller, S-net mini) except for a Wired Remote Controller.
NASA_Wired Remote Control_MWR-WE10N_EN_IB_DB68-06362A-01.indd 9
2016-08-01 오전 9:17:58
