ENGLISH-15
02
INST
ALL
ATION
Using installation/service mode of ERV wired remote controller
Additional functions of ERV wired remote controller
SEG used
Main menu
Exit
Set, Cancel
Up and down
Left and right
Sub menu
1 2
1. If you want to use the various additional functions for the ERV wired remote controller,
press the Mode and
buttons at the same time for more than three seconds.
f
f
You will enter the additional function settings, and the main menu is displayed .
2. Refer to the list of additional functions for the ERV wired remote controller on the next
page, and select the desired menu.
f
f
Using the
/
buttons, select a main menu number and press the
Away
button to enter the sub-menu
setting screen .
f
f
Using the
/
buttons, select a sub-menu number and press the
Away
button to enter data setting
screen .
f
f
When you enter the setting stage, the current setting is displayed .
f
f
Refer to the chart for data settings .
f
f
Using the
/
buttons, select the settings and press the
Away
button to move to the next setting .
f
f
Press the
Set
button to save the settings and exit to the sub-menu setting screen .
f
f
Press the
Timer
button to exit to normal mode .
• While setting the data, press the
Mode
or
Away
button to move the digit of SEG .
• If you press the
Timer
button while your are setting data, you can exit to the sub-menu setting
stage without saving your changes .
Note
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 15
2016-12-23 오후 6:02:55
