6
2. Using T1
Important Information:
Your T1 is partitioned into a security partition and a data storage partition by default in order to provide
a higher level of security. The T1 is preconfigured to display only the security partition under factory
settings. Therefore, to use the data storage partition, your T1 must be activated on a PC. The T1
cannot be activated if the PC does not fulfill the recommended specifications or if the T1 is connected
to the USB port of a device other than a PC. Please activate the product using a PC that meets the
recommended specifications.
❙
Connecting to a PC
Connect the T1 to a desktop PC or laptop
using a USB port as shown in the figure
below.
If connected properly, only the security
partition (128 MB on Windows 7) will be
displayed on the PC. Once the device is
activated using the supplied activation
software, the entire data storage partition
will be recognised by the PC.
❙
Activation
Running the software
You can activate your T1 by using the appropriate software.
During the activation process, you can designate a unique name for your T1 and enable password
protection for data security.
1
In Windows Explorer (Windows OS) or Finder (Mac OS), select the T1_Setup drive launch icon.
Windows OS
Mac OS
Samsung Portable SSD.exe
Samsung Portable SSD.app
2
Double-click the launch icon to run the software.