GB
9
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM
aerial connector terminals are located on the rear of the sys-
tem and are marked
AM
.
To avoid noise interference, check that the loudspeaker wires do
not run close to the
aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM (MW)/LW
Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75
Ω
antenna to the
FM
antenna terminal.
Plug the connector on the
FM
aerial supplied into the coaxial socket
(75
Ω
) marked
FM
on the rear of the system.
Follow the instructions given on
Page 18
to tune into a radio sta-
tion, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor
FM
aerial to the
FM
socket on the rear
of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Aerial
VIDEO OUT
VIDEO OUT
VIDEO OUT
Using the Video Cord, Connect the Video Output Terminal of the
system with the Video Input Terminal of TV.
Turn on the TV and Select the Video mode by pressing the
TV/VIDEO SELECT button to the VIDEO Position.
Connecting to the TV
VIDEO OUT
VIDEO IN
TV
Connecting the SW Aerial (option)
How to connect a WIRE TYPE aerial.
Spread the
SW
aerial out and attach the ends to a wall, in the position
providing the best reception.
If reception is poor (e.g. distance from transmitter too great, walls blocking
the radio waves, etc.), install an outdoor aerial.
VIDEO OUT
