background image

GB

7

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check
the voltage.

Check the position of the voltage selector on the rear of the system

(OPTIONAL).

Plug the main lead (marked AC Cord on the rear of the system) into

an appropriate socket.

Press the on/standby button to switch your mini-compact system on.

To take full advantage of your new mini-compact system, follow
these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc
compartment easily.

Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.

Where to Install Your 
Mini-Compact System

Connecting your System to the
Power Supply

1

2

Insert or replace remote control batteries when you:

Purchase the mini-compact system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.

Place your thumb on the position marked       on the battery 
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.

Insert two AA, LR06 or equivalent batteries, taking care to respect
the polarities:

+ on the battery a in the battery compartment

– 

on the battery against – in the battery compartment

Replace the cover by sliding it back until it clicks into position.

If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.

Inserting Remote Control Batteries

1

2

3

On/Standby

AUX

Phones

MIC

MIC Mixing

Power

Surround

Volume

Sleep

Mono/ST

Open/Close

Multi Jog

Sound
Mode

S.Bass

Level 

REC/Pause

CD Synchro

CD Repeat

TUNER

/Band

Tuning Mode

VCD/CD

TAPE

VCD/MP3-CD/CD-R/RW PLAYBACK

Color Display

/Demo

3

Summary of Contents for MM-VB9




























Reviews: