Samsung ML-3561N Series, Service Manual

Page: 85 / 156

Service Manual
Alignment & Adjustments
6-14
Samsung Electronics
6.1.10 Fuser
This function is to check a current state (normal or not) of the fuser.
• Usage
1. Press the Arrow Keys ( / ) until finding [Main Menu]/ Fuser message on the panel.
2. Press the OK Key , when it is found.
3. Confirm the message, [Function]/ Fuser Temp. .
4. Press the OK Key .
5. Set the temperature with arrow keys. (Default: 170 , Range: 150 -190 )
6. Press the OK Key for executing or the Cancel key for stopping this function.
7. Compare a target temperature with a real temperature.
• Function
* The procedure and content above can be changed according to the situation.
6.1.11 Opc Cycle
-This function is to check a total rotating number of OPC drum as of the entering point.
The entering point means the time when the power is on, not the initial point of the OPC Cycle test.
• Usage
1. Press the Arrow Keys ( / ) until finding [Main Menu]/ OPC cycle message on the panel.
2. Press the OK Key , when it is found.
3. Confirming the [Function]/ Read OPC cycle message, press the OK key .
4. Press the Cancel key for stopping this function.
• Function
* The procedure and content above can be changed according to the situation.
Function Name Description Display(LCD) Remarks
Fuser Temp.
When Target Temp is displayed, Input a
temperature you would like to set with the arrow keys
( / ) and Press the Ok key . The target temper-
ature and a real temperature will be
displayed on the bottom line.(Default T is 170)
Fuser Temp.
T: 170, C: XX
Function Name Description Display(LCD) Remarks
Read OPC
Cycle
A total rotating number of OPC drum is displayed on
the bottom line of LCD window, when the process is
on.
Total OPC-Cycle
XXXX