manualshive.com logo in svg

Samsung ML-331 Series, User Manual

Share
Download
Samsung ML-331 Series User Manual Download Page 65

56

3. Useful setting menus

Information

Item

Description

Menu Map

Prints the menu map which shows the layout 
and current settings of this machine.

Configuration

Prints a report on the machine's overall 
configuration.

Supplies Info.

Prints supplies’ information page. 

Demo Page

Prints the demo page to check whether your 
machine is printing properly or not.

PCL Font (PCL Font 
List)

Prints the PCL font list.

PS Font (PS Font 
List)

Prints the PS font list.

EPSON Font 
(EPSON Font List)

Prints the EPSON font list.

KSC5843 Font List

Prints the KS font list.

KSC5895 List

Prints the KS5895 font list.

KSSM Font List

Prints the KSSM font list.

Stored Job List

Prints jobs currently stored in the optional 
memory or on a hard disk (HDD).

Usage Counter

Prints a usage page. The usage page contains 
the total number of pages printed.

Completed Job

Prints list of completed jobs.

Accounting Report

This is used only available when Job 
Accounting is enabled from the SyncThru™ 
Web Admin Service. You can print a report of 
printout counts for each user.

Item

Description

Summary of Contents for ML-331 Series





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands