Media and tray
_ 42
Printing Preferences" on page 44.)
USING THE OUTPUT SUPPORT
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. Pull out the output support and expend it.
Stacking papers firmly
If you use a machine in a humid area, or you are using the damp print media
caused by a high humidity, the print-outs on the output tray may be curled
and may not be stacked properly. In this case, you can set the machine to
use the Paper Stacking function to let print-outs stacked firmly. But, using
this function will make the print speed slow.
1.
Press
until
System Setup
appears on the bottom line of the display
and press
OK
.
2.
Press the left/right arrow until
Maintenance
appears and press
OK
.
3.
Press the left/right arrow until
Paper Stacking
appears and press
OK
.
4.
Press the left/right arrow to select
On
or
Off
and press
OK
.
5.
Press
to return to ready mode.
