Service Manual
Alignment & Troubleshooting
4-6
Samsung Electronics
Using SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network
printer card or interface.
Especially, it is for the network administrator to set several network IPs at the same time.
Note
If you want to setup DHCP network protocol, go to the http://developer.apple.com/networking/bonjour/download/,
select the program Bonjour for Windows due to your computer operating system, and install the program. This
program will allow you to fix the network parameter automatically. Follow the instruction in the installation
window. This program does not support Linux.
1. Insert the driver CD provided along with your machine.
2. Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.)
3. Double click Application > SetIP
4. Open the language folder you want to use.
5. Double click Setup.exe to install this program.
6. From the Windows Start menu, select Programs > Samsung Network Printer Utilities > SetIP.
7. Select the name of your printer and click "
".
Note
If you cannot find your printer name click "
" to refresh the list.
8. Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
Note
If you do not know the network card's MAC address, print the machine's network information report.
9. Click OK to confirm the settings.
10. Click Exit to close the SetIP program.
