manualshive.com logo in svg

Samsung ML-1740/XSH, Service Laser Printer Ml-1740/Xsh Manual, Page: 65 / 107

Share
Download
Samsung ML-1740/XSH Service Laser Printer Ml-1740/Xsh Manual Download Page 65

7-5

Samsung Electronics

T RO U B L E S H O OT I N G

Service Manual

7.1.9  Ghost (1) 

• Description

Ghost occurs at 75.5 mm intervals of the OPC drum in the whole printing.

Digital Printer

Digital Printer

Digital Printer

Digital Printer

Digital Printer

Digital Printer

75.5mm

Check and Cause

Solution

1. Bad contacts caused by contamination

from toner particles between high voltage
terminal in the main body and the elec-
trode of the Developer.

2. Bad contacts caused by contamination

from toner particles between high voltage
terminal in the main body and the one in
the HVPS board.

3. The life of developer is expired.

4. Transfer roller lifetime(60.000 sheets) has

expired.

5. Abnormal low temperature(below 10°C).

1. Clean the terminals when contaminated by

toner particles.

2. Occur in the developer cartridge, replace

the developer and try to print out.

3. Replace the engine board if not solved by

the above directions 1-2.

4. If not solved by the direction 3, check the

transfer roller lifetime and replace it.

5. Wait about 1 hour after power on before

using printer.

7.1.10 Ghost (2)

• Description

Ghost occurs at 75.5 mm intervals of the OPC drum in the whole printing.
(When printing on card stock or transparencies using manual feeder)

Digital Printer

Digital Printer

Digital Printer

Digital Printer

Digital Printer

Digital Printer

75.5mm

Check and Cause

Solution

When printing on card stock thicker than nor-
mal paper or transparencies such as OHP,
higher transfer voltage is required.

Select 'Thick Mode' on paper type menu from
the software application and after using return-
ing to the original mode is recommended. 

Summary of Contents for ML-1740/XSH












































































































Reviews:

No comments