manualshive.com logo in svg

Samsung ML-1740/XSH, Service Laser Printer Ml-1740/Xsh Manual, Page: 29 / 107

Share
Download
Samsung ML-1740/XSH Service Laser Printer Ml-1740/Xsh Manual Download Page 29

4-12

S U M M A RY  OF  PRO D U C T

Samsung Electronics

Service Manual

4.4 SMPS & HVPS

The SMPS supplies the DC power to the system.
It takes 110V/220V and outputs the +3.3V, +5V and +24V to supply the power to the main board and ADF
board.
The HVPS part creates the high voltage of THV/MHV/Supply/Dev and supplies it to the developer part for
making the best condition to display the image. The HVPS part takes the 24V and outputs the high voltage
for THV/MHV/BIAS, and the outputted high voltage is supplied to the toner, OPC cartridge, and transfer
roller.

MAIN PBA CON.

CN3

(FAN CON.)

CN1

(H/L CON.)

F101

250V L2A

EXIT SENSOR

CN4

(PANEL CON.)

MHV OPC

DEV

SUPPLY

THV

COVER OPEN SWITCH

MANUAL SENSOR

FEED SENSOR

PAPER-EMPTY SENSOR

F1

 110V : 125V/8A

220V : 250V T 5A H

F2

 110V : 125V/3A

220V : 250V 2A H

Summary of Contents for ML-1740/XSH












































































































Reviews:

No comments