![Samsung MIM-H03N User & Installation Manual Download Page 13](http://html.mh-extra.com/html/samsung/mim-h03n/mim-h03n_user-and-installation-manual_358919013.webp)
13
ENGLISH
2) Select one MAC address among searched Wi-Fi kits.
- MAC address can be found on the label inside of Wi-Fi kit.
MAC: XXXXXXX
3) Set tenant address. (Not Support, 0~F)
- Enter tenant address to S-NET pro 2, and it will be applied as below.
Tenant address
Group channel address of indoor unit controlled by Wi-Fi kit
Not Support
Control all indoor units connected to outdoor unit
0
Control indoor units assigned to group channel address 0
1
Control indoor units assigned to group channel address 1
2
Control indoor units assigned to group channel address 2
3
Control indoor units assigned to group channel address 3
4
Control indoor units assigned to group channel address 4
5
Control indoor units assigned to group channel address 5
6
Control indoor units assigned to group channel address 6
7
Control indoor units assigned to group channel address 7
8
Control indoor units assigned to group channel address 8
9
Control indoor units assigned to group channel address 9
A
Control indoor units assigned to group channel address A
B
Control indoor units assigned to group channel address B
C
Control indoor units assigned to group channel address C
D
Control indoor units assigned to group channel address D
E
Control indoor units assigned to group channel address E
F
Control indoor units assigned to group channel address F
- Ex.) If tenant address 2 is entered on Wi-Fi kit by S-NET pro 2, only indoor units assigned to 2 for RMC1 will be the target of
controlling and monitoring.
4) Click
Apply
and the tenant address will be saved on Wi-Fi kit.
•
Refer to “Setting an indoor unit address and installation option” in installation guide of indoor unit to set indoor unit
group address. (SEG9: 1, SEG11: RMC1)
•
If you want to reset the tenant address, please contact Samsung service center.
•
To control all indoor units classified by tenant addresses with one smartphone, each Wi-Fi kit should be registered
on the smartphone.
•
When using multi tenant function by Wi-Fi kit, upper controllers other than OnOff controller (such as Touch
centralized controller, DMS, etc.) can be installed at the same time.
NOTE
MULTI WIFI-APP-EU_IBIM_EN.indb 13
2017-05-30 오전 10:59:54