E-
32
System Settings (Continued)
Selecting the contact point control pattern
1
Click [System Settings].
2
Click [Edit] from the 'Select the contact point control pattern' section.
3
Select the pattern you want to check when checkboxes enables.
Pattern 1: No operation will be made when inputting contact control signal.
Pattern 2[Level (Emergency stop)]: Commands to stop all operation of indoor unit
(except DDC) and disable remote control when inputting contact control signal.
In level emergency stop status, it will not be controllable even if the command is
from upper controller.
Pattern 3[Level (Operation/Stop)]: Level signal input timing. It changes operation/
stop status of all indoor units.
Pattern 4[Pulse (Operation/Stop, Disable/Enable)]: Pulse signal. It changes
operation/stop status of all indoor units.
4
When pattern is selected, click [Save].
1
2
4
3
MIM-B17_BACnet Gateway_IM_E 32390-3.indd 32
2011-04-04 오후 3:44:28
Summary of Contents for MIM-B17
Page 40: ...E 40 Tracking Continued DVMTracking 1 Click Device Configuration 2 Click DVM Tracking 1 2 ...
Page 62: ...E 62 Memo ...
Page 63: ...E 63 ...
Page 64: ......
