Samsung ME75B User Manual Download Page 158

Page: 158 / 222

158

System

8 System

8.5.2

Eco Sensor (Off / On)

To enhance your power savings, the picture settings will automatically adapt to the light in the room.

If you adjust

Backlight

in the

Picture

menu,

Eco Sensor

will be set to

Off

Min. Backlight

: When

Eco sensor

you can manually adjust the minimum screen brightness.

Eco Sensor

, the display brightness may change (become slightly

darker or brighter)

depending on the surrounding light intensity. You can

control the screen’s minimum brightness

with the

Min. Backlight

function.

8.5.3

No Signal Power Off

To avoid unnecessary

energy consumption, you can set how long you want the product to remain on if

it’s

not receiving a signal.

Off

15 min.

30 min.

60 min.

Disabled when an attached PC is in power saving mode.

The default setting is 15 min. for this product.

The product will automatically power off at a specified time. The time can be changed as required.

8.5.4

Auto Power Off (Off / On)

The product will automatically turn off if you don’t press a button on the remote or touch a button on

product front panel within 4 hours to prevent overheating.

Summary of Contents for ME75B































































































































































































































Search results

Summary of Contents for ME75B

Reviews:

Brands by name

Popular brands

Samsung ME75B, User Manual

Search results

Summary of Contents for ME75B

Reviews:

Brands by name

Popular brands