English - 14
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is working correctly
at all times.
Open the oven door by pushing the push button on the bottom side of the control panel.
Place a glass of water on the turntable. Then, close the door.
1.
Press the
Number
button to enter operating time.
(4 to 5 minutes)
2.
Press the
START
button.
Result:
The oven light comes on and the turntable starts
rotating.
1) Cooking starts and when it has finished the
oven beeps 4 times.
2) The end reminder signal will beep 1 times
(once every minute).
3) The current time is displayed again.
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum is used, the water
takes longer to boil.
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “12:00” is
automatically displayed on the display.
Please set the current time.
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1.
Press the
Clock
button.
2.
Use the
Number
buttons to enter the current time.
You must press at least three numbers to set the clock. If
the current time is 5:00 enter
5
,
0
,
0
.
3.
Press the
START
button.
If there is a power interruption, you will need to reset the clock. You can check the
current time while cooking is in progress by pressing the
Clock
button.
SETTING COOKING TIMES & POWER LEVELS
Your microwave allows you to set up to two different stages of
cooking, each with its own time length and power level. The
Power Level
button lets you control the heating intensity from
Warm (1) to High (10).
ME6104W1_XSA_DE68-04262B-01_EN.indd 14
2014-08-18 4:54:23
