21
Step-by-step installation guide
C4. ADAPTING MICROWAVE
BLOWER FOR OUTSIDE BACK
EXHAUST (cont.)
3
. Carefully pull out the blower unit. The wires will
extend far enough to allow you to adjust the blower
unit.
End A
End B
BEFORE: Fan Blade
Openings Facing Forward
5
. Rotate blower unit counterclockwise 180°.
Before Rotation
After Rotation
Back of
Microwave
Back of
Microwave
Before Rotation
After Rotation
Back of
Microwave
Back of
Microwave
6
. Place the blower unit back into the opening.
End B
End A
AFTER: Fan Blade
Openings Facing Back
CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not pinched.
NOTE: The blower unit exhaust openings should
match exhaust openings on rear of microwave
oven.
7
. Replace the blower plate in the same position as
before with the screw.
8
. Attach the exhaust adaptor to the rear of the oven
by sliding it into the guides at the top center of the
back of the oven.
!DAPTOR
"ACKOF
-ICROWAVE
'UIDE
'UIDE
,OCKING4ABS
Push in securely until it is in the lower locking tabs.
Take care to assure that the damper hinge is installed
so that it is at the top and that the damper swings
freely.
DE68-03587B-EN.indd 21
2008-12-09 �� 4:13:17
4
. Remove “Parts “A” with tin snips or pliers.
Parts “A”
(On Some Model)
