16
Step-by-step installation guide
B3. ADAPTING MICROWAVE
BLOWER FOR RECIRCULATION
Back of
Microwave
1.
Remove and save screw
that holds blower plate to
microwave.
2.
Lift up the
blower plate.
NOTE: The exhaust adaptor with damper is not needed
for recirculating models. You may want to save them for
possible future use.
3
. Carefully pull out the blower unit. The wires will
extend far enough to allow you to adjust the blower
unit.
CAUTION: Do not touch blade of blower forpreventing
crack and break. Hold outer case when the blower pull
out or back into.
4
. Roll the blower unit 90° so that fan blade openings
are facing toward the front of the microwave.
BEFORE: Fan Blade
Openings Facing UP
AFTER: Fan Blade
Openings Facing Forward
5
. Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit wiring.
Make sure the wires are not pinched.
6
. Secure blower unit to microwave with the screw.
blower mortor screw
DE68-03587B-EN.indd 16
2008-12-09 �� 4:13:14
