10
Step-by-step installation guide
D. ALIGNING THE WALL PLATE
CL
Draw a Horizontal line on wall from
bottom of “Rear Wall Template˝.
Draw a Vertical Line
on Wall from Center
of Top Cabinet
Horizontal Line
Horizontal Line
Area E
Hole C
Centerline
notches
Hole A
Hole B
CAUTION
: Wear gloves to avoid cutting fingers
on sharp edges.
1
. Draw a Vertical line on the wall at the center
of the 30˝ wide space.
2
. Draw a Horizontal line on the wall at the
bottom of “Rear Wall Template”.
3
. Drill ⅝˝ holes for toggle bolts on 3 locations
(Hole A, Hole B, Hole C) but if the location of
hole is same as that of stud, drill a
3
/
16
˝ hole
for wood screw. In other words, toggle bolt
can not be used to the location of stud.
NOTE: DO NOT MOUNT THE PLATE AT
THIS TIME.
NOTE
: Holes A, B and C are inside area E.
If none of A, B and C is in a stud, find a stud
somewhere in area E and draw a forth circle to
line up with the stud. It is important to use
at
least one wood screw
mounted
firmly in a
stud
to support the weight of the microwave.
Set
the mounting plate aside
.
SMH8165_XAA_DE68-03587A-10_EN.indd 10
6/19/2019 3:44:33 PM
