background image

3

ENGLISH

CAUTION SIGNS

Do not install the product in a place where it is or might be exposed to inflammable gas leakage. 

f

f

There is risk of fire or explosion.

Do not install the product in a place where it will be exposed to oil or vapor etc.

f

f

If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product may get 
damaged or product may function abnormally. 

Make sure that water does not get into the product.

f

f

There is risk of electric shock and fire.

Make sure there is no tension to the cable during installation.

f

f

Cable may get cut and cause fire.

Install the product in a place with temperature between 0 °c~39 °c with no direct sunlight.

f

f

There is risk of electric shock or abnormal operation.

Do not install the product in a place where special spray or acid/alkali solution is used.

f

f

There is risk of electric shock or abnormal operation.

Do not press the button with sharp object.

f

f

There is risk of electric shock or damaging the parts.

Do not connect the power cable to the communication cable terminal.

f

f

There is risk of fire or explosion.

When installing the product in hospitals or other places, make sure that the product does not interrupt with other 
products.

f

f

Abnormal operation may occur.

Touch-controller_IM_03943A_1_EN.indd   3

2013-06-28   오후 3:07:02

Summary of Contents for MCM-A300N













Reviews: