Samsung MAX-460V, Service Manual

Page: 7 / 71

3-5 CD Mecha Main Continued
3-6 CD-PCB
1. Turn the Bracket-chuck
!
counter clockwise to remove.
2. Remove the Table-Chuck union
@
.
3. Remove the Magnet-Chuck
#
.
4. Remove the screw
$
and then lift the Gear-Tray(2)
%
.
5. Remove the Belt-disc
^
.
6. Remove the screw
&
and then lift the Gear-Pulley
*
.
7. Lift the Gear-Tray(1)
(
.
8. Remove 2 screws and then remove the Motor-DC
1
.
9. Remove the Pulley-Motor
2
.
10. Remove 1 screw
Y
and then remove the PCB-SUB switch
3
.
11. Remove the Switch-Micro
4
with using the soldering iron.
12. Remove the Connector-Wafer
5
with using the soldering iron.
13. Remove 2 screws
6
and then remove the Gear-Cam
7
.
14. Remove the Belt-Disc
8
.
15. Remove 1 screw
Y
and then remove the PCB-SUB switch
9
.
16. Remove the Switch-Micro
0
and the Connector-Header
“
.
17. Remove the Pulley-Motor
=
.
18. Remove 1 screw
Q
and then lift the Gear-Pulley
q
.
19. Remove 1 screw
W
and then lift the Gear-UD(2)
w
.
20. Lift the Gear-UD (1)
E
.
21. Remove 1 screw and then remove the Clamp-Wire
D
.
1. Remove 2 screws
!
.
2. Remove the PCB
@
with using the soldering iron.
3. Remove the Hook
#
.
4. Remove four Shaft-CD
$
and then remove four Rubber-CD
%
.
5. Remove the CD-Deck
^
and Lever-Lift
&
is removed automatically.
6. Remove the Shaft
*
.
Samsung Electronics 3-5
* Refer to
U
of Figure 3-5.
Disassembly and Reassembly