Installing the Washing Machine
2
SAMSUNG
Washing Machine Owner
’
s Instructions
Unpacking the Washing Machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that
you have received all of the items shown below. If the washing machine was damaged
during shipping or you do not have all of the items, contact your Samsung dealer
immediately.
Overview of the washing machine
Selecting a locatio
Before you install the washing
•
A hard, level surface (if t
•
Away from direct sunlig
•
Adequate ventilation
•
Room temperature that w
•
Away from sources of he
Make sure that the washing m
Ventilation openings must no
installed on a carpeted floor.
Adjusting the level
If the floor is uneven, adjust th
the feet):
1.
Loosen the leg bolt by tur
2.
Tighten the locking nut b
•
Place the washer on a sturdy,
If the washer is placed on a
(Only a l degrees angle is a
Removing the ship
Before using the washing mac
of the
u n i t .
T
o
remove the bolts:
head and pull it through the w
part of the hole.
Repeat for each bolt.
3.
Fill the holes with
supplied plastic covers.
4.
Keep the shipping bolt
future use.
Connecting the w
Installing t
Hose guide
Plug
* (Option)
Hot
Water
supply
hose
Cold
Water
supply
hose
Bolt hole
covers
Wrench
Emergency drain
tube
Debris filter
Worktop
Control panel
Detergent
drawer
Door
Base cover
Adjustable feet
Drain Hose
1. Remove the adaptor
from
the
water supply hose.
2. First, using a “+” type screw driver, loose
four screws on the adaptor. Next, tak
adaptor and turn part(b) following the arrow
there is a 5mm gap.
3. Connect adaptor to the water tap by tighte
the screws firmly.
Then, turn part (b) following the arrow and p
and (b) together.
