background image

English-

47

Using the V-Chip

The V-Chip feature automatically locks out programming that is deemed inappropriate for
children. The user must first enter a PIN (personal ID number) before any of the V-Chip
restrictions can be set up or changed. 

Setting Up Your Personal ID Number (PIN)

1

Press the 

MENU

button

to display the menu.

Press the 

DOWN

button to select 
“Function”, then press
the 

RIGHT

button.

2

Press the 

DOWN

button to select
“V-chip”, then press the

RIGHT

button.

3

After entering a valid
PIN number, the
“V-chip” screen will
appear. Press the

DOWN

button to

select “Change Pin.” 

4

Press the 

RIGHT

button. The Change
pin screen will
appear. Choose any
4-digits for your PIN
and enter them.

Note: If you forget the PIN,

press the remote-control
buttons in the following
sequence,which resets the pin
to 0-0-0-0:

POWER OFF 

 

MUTE 

 

 

 

POWER ON.

S

P E C I A L

F

E AT U R E S

As soon as the 4 digits are entered, the “Confirm new
Pin” screen appears. Re-enter the same 4 digits.
When the Confirm screen disappears, your PIN has
been memorized. 
Press the 

MENU

button to exit. 

The “Enter Pin” screen will appear. Enter your 4-digit PIN
number. Note: The default PIN number for a new TV set is

0-0-0-0.”

08.CHAPTER4_EN  9/2/03 3:25 AM  Page 47

Summary of Contents for LTN226W









































































Reviews: