background image

22

Menu

Function Key Guide → 

Chapter  04

 

The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Picture

2nd

3rd

Description

Picture Mode

This menu provides an optimum picture quality suitable for the environment where the product will be used.

 

This menu is not available when 

Eco Saving Plus

 is enabled.

 

This menu is not available when 

Eye Saver Mode

 is enabled.

 

This menu is not available when 

PIP/PBP Mode

 is enabled.

In 

PC

 mode

 

Custom

: Customise the screen settings.

 

High Bright

: Make the screen look brighter than 

sRGB

 mode.

 

sRGB

: Adjust the colour system to 

sRGB

 mode. This is the standard mode of this monitor.

 

BT.709

: Adjust the colour system to 

BT.709

 mode. This mode is ideal to view HDTV content.

 

DCI-P3

: Adjust the colour system to 

DCI-P3

 mode. This mode is ideal to view movies.

 

DICOM Simulation

: Adjust the colour system to 

DICOM Simulation

 mode. This mode is ideal to view medical images.

 

Cinema

: Obtain the brightness and sharpness of monitors suitable for enjoying video and DVD content.

 

Dynamic Contrast

: Obtain balanced brightness through automatic contrast adjustment.

Summary of Contents for LS32B800PXUXXU












































Reviews: