English-11
Switching On and Off
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the
POWER
(
) button on the remote control.
Result:
The screen is turned off and a orange standby indicator
appears on the front of your set.
2
To switch your set back on, simply press the
POWER
(
), numeric
buttons (
0~9
) or channel up/down (
/
) button again.
Do not leave your set in standby mode for long periods of time (when
you are away on holiday, for example).
Turn your set off by pressing the
POWER
(
) button on the
right-side
of the set.
It is best to unplug the set from the mains and aerial.
1. Use of the '
POWER
(
)
' button on the remote is possible only when
the TV is in 'Power Saving' (standby) mode. If the TV is powered off,
the remote cannot be used to turn the TV on.
2. To retain the time or automatic alarm settings, always put the TV
in standby mode with the remote control. Turning off the power on the
TV will initialize all the values set previously.
[Benefit] This full 'power off' function is as effective as unplugging the
power cable.
TV switches to standby mode when powered off by the remote
control. To return power (
) to the screen, press the remote control
'ON' or channel button( ). Pressing the power button on the TV does
not return power to the screen because in this case, the TV restores
the last mode, which was 'Power Saving'.
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result:
The main voltage is indicated on the rear of your set and
the frequency is 50 or 60Hz.
2
Press the
POWER
(
) button on the right-side of your set.
Result:
The standby indicator lights up on the front panel.
3
Press the numeric button (0~9) or channel up/down (
/
) button
on the remote control or
C/P.
button on the right-side of
your set.
Result:
The programme that you were watching last is reselected
automatically.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4
To switch your set off, press the
POWER
(
) button again.
BN68-00653K-00Eng.qxd 6/30/04 9:14 AM Page 11