Samsung LS15S13C Owner'S Instructions Manual Download Page 44

Page: 44 / 52

English-44

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.

◆

Check that the mains lead has been connected to a wall socket.

◆

Check that you have pressed the

POWER

button (

)

◆

Check the picture contrast and brightness settings.

◆

Check the volume.

◆

Check the volume.

◆

Check whether the

MUTE

(

) button has been pressed on the

remote control.

◆

Adjust the colour settings.

◆

Check that the broadcast system selected is correct.

◆

Try to identify the electrical appliance that is affecting the television
and move it further away.

◆

Plug your television into a different mains socket.

◆

Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.

◆

Replace the remote control batteries.

◆

Clean the upper edge of the remote control (transmission window).

◆

Check the battery terminals.

◆

Ensure that the signal cable is firmly connected to the PC or video
sources.

◆

Ensure that the PC or video sources are turned on.

◆

Check the maximum resolution and the frequency of the video
Adapter.

◆

Compare these values with the data in the Display Modes Timing
Chart.

◆

Adjust the Brightness and Contrast.

◆

Adjust the Fine function.

◆

Adjust the Coarse function and then adjust the Fine function.

◆

The TV is using its power management system.

◆

Move the computer’s mouse or press a key on the keyboard.

◆

Check that the display resolution and frequency from your PC or
video board is an available mode for your TV. On your
computer check: Control Panel, Display, Settings.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,
distorted sound

Remote control malfunctions

“Check Signal Cable” message.

“Not Supported Mode!” message.

The image is too light or too dark.

Horizontal bars appear to flicker, jitter
or shimmer on the image.

Vertical bars appear to flicker, jitter or
shimmer on the image.

Screen is black and power indicator
light is steady blinks 1 second.

Summary of Contents for LS15S13C





















































Search results

Summary of Contents for LS15S13C

Reviews:

Related manuals for LS15S13C

Brands by name

Popular brands

Samsung LS15S13C, Owner'S Instructions Manual

Search results

Summary of Contents for LS15S13C

Reviews:

Related manuals for LS15S13C

Brands by name

Popular brands