English-32
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD,
Samsung Set-Top Box or the TV source (broadcast or cable).
Viewing an External Signal Source
1
Press the
MENU
button.
Press the
ENTER
button to select “Input”.
2
Press the
or
button to select
“Source List”, then press the
ENTER
button.
Press the
or
button to select
a signal source, then press the
ENTER
button.
•
When you connect equipment to the TV,
you can choose between the following sets
of jacks: “AV1”, “AV2”, “S-Video1”, “S-Video2”,
“Component1”, “Component2”, “PC”, “HDMI1”,
or “HDMI2” on the TV’s rear panel.
Alternate method
Setting the Signal Source
Press the
SOURCE
button on the remote control
repeatedly to select an external signal source.
Only connected devices can be selected.
Before selecting an input source, make sure the corresponding external device is connected first.
HDMI input can be selected only when the external device is turned on and connected to the TV.
BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 32
