English - 23
CHANNEL CONTROL
Configuring the Channel Menu
Antenna → Air / Cable
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
Press the
TOOLS
button to display the
Tools
menu. You can also set the Antenna by
selecting
Tools → Switch to Cable
(or
Switch to Air
).
Auto Program
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna
signals
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
program menu then reappears.
If you want to stop Auto Programming, press the
ENTER
E
button. The
Stop Auto Program?
message will be displayed.
Select
Yes
by pressing the ◄ or ► button, then press the
ENTER
E
button.
Clear Scrambled Channels (digital channels only)
This function is used to filter out scrambled channels after
Auto Program
is completed. This process may take up to 20~30
minutes.
To stop searching scrambled channels: Press the
ENTER
E
button to select
Stop
. Press the ◄ button to select
Yes
, then
press the
ENTER
E
button.
This function is only available in
Cable
mode.
Channel List
For detailed procedures on using the
Channel List
, refer to the ‘Managing Channels’ instructions.
You can select these options by simply pressing the
CH LIST
button on the remote control.
Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
*
will appear next to the name of fine-tuned channels.
To reset the fine tuning setting, press the ▼ button to select
Reset
, then press the
ENTER
E
button.
Managing Channels
Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favorite
Shows all favorite channels.
To select the favorite channels you have set up, press the
FAV.CH
button on the remote control.
¦
❑
T
❑
N
N
N
❑
N
N
❑
O
❑
N
N
N
¦
O
Antenna
: Air
►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Channel
2
Air
4
Air
4-2 ♥ TV #8
8
Air
13
Air
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
Added Channels
Air
Zoom Select
T
Tools
BN68-01883A-01Eng.indb 23
2009-01-30 �� 10:36:16
