English - 4
Setting the auto motion Plus
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 21)
2.
Press the ▲ or ▼ button to select “Auto Motion Plus”, then press the
EntEr
button.
3.
Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High” or “Demo”, then
press the
EntEr
button.
off
: Switches Auto Motion Plus off.
low
: Sets Auto Motion Plus to minimum.
medium
: Sets Auto Motion Plus to medium.
high
: Sets Auto Motion Plus to maximum.
Demo
: Displays the difference between Auto Motion Plus on and off modes.
The screen after applying “Auto Motion Plus” appears on the left.
•
•
•
•
•
Press the
ExIt
button to exit.
If you enable “Auto Motion Plus”, noise may appear on the screen.
If this occurs, set “Auto Motion Plus” to “Off”.
This function is not available in “Wide Zoom” and “Zoom” modes.
100Hz is supported for regions where 50Hz is supported.
➣
➣
➣
Setting the blue only mode
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 21).
2.
Press the ▲ or ▼ button to select "Blue Only Mode", then press the
EntEr
button.
3.
Press the ▲ or ▼ button to select "Off" or "On", then press the
EntEr
button.
Press the
ExIt
button to exit.
“Blue Only Mode” is available when the picture mode is set to “Movie” or
“Standard”.
resetting the Picture Settings to the factory Defaults
1.
Press the
mEnu
button to display the menu.
Press the
EntEr
button, to select “Picture”.
2.
Press the ▲ or ▼ button to select "Reset", then press the
EntEr
button.
Press the ▲ or ▼ button to select “OK” or “Cancel” then press the
EntEr
button.
Press the
ExIt
button to exit.
Each mode can be reset.
move
Enter
return
Color Tone
: Normal
►
Size
: 16:9
►
Digital NR
: Auto
►
DNle
: Off
►
HDMI Black Level : Normal
►
auto motion Plus
: Medium
►
Blue Only Mode : Off
►
Picture options
tV
move
Enter
return
Color tone
: normal
Size
: :
Digital nr
: auto
Dnle
: off
hDmI black level : normal
auto motion Plus : medium
blue only mode : off
Picture options
tV
off
low
medium
high
Demo
move
Enter
return
Color
Tone
: Normal
►
Size
: 16:9
►
Digital NR
: Auto
►
DNle
: Off
►
HDMI Black Level : Normal
►
auto motion Plus
: Medium
►
Blue Only Mode : Off
►
Picture options
tV
move
Enter
return
Color
tone
: normal
Size
: :
Digital nr
: auto
Dnle
: off
hDmI black level : normal
auto motion Plus : medium
blue only mode : off
Picture options
tV
off
on
move
Enter
return
▲ More
Picture options
reset
: oK
Picture
tV
oK
Cancel
BN68-01429B-Eng-0314.indd 24
2008-04-06 ¿ÀÈÄ 8:07:10
