26
English
Advanced Features
notice
The picture may appear corrupted or have static for some
channels when the TV is connected to the Samsung Wireless
LAN Adapter. In such a case, establish a connection using one
of the following methods or connect the Samsung Wireless LAN
Adapter using a USB cable in a place that is not affected by
radio interference.
Method 1
Connect using the USB right angle adapter
To connect the Samsung Wireless LAN Adapter using the
USB right angle adapter, follow these steps:
1.
Connect the USB right angle adapter to the Samsung
Wireless LAN Adapter.
2.
Connect the other end of the right angle adapter to the
UsB 1 (hDD)
port.
Method 2
Connect via an extension cable
or
To reconnect the Samsung Wireless LAN Adapter using the
extension cable, follow these steps:
1.
Connect the extension cable to the
UsB 1 (hDD)
port.
2.
Connect the extension cable and Samsung Wireless LAN
Adapter.
3.
Attach the Samsung Wireless LAN Adapter to the back of
the TV near the top, using double-sided adhesive tape.
network setup (PBC (WPs))
how to set up using PBC (WPs)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the
MEnU
button on your
remote, use the
▲
or
▼
button to select
setup
, and
then press the
EnTER
E
button.
3. Use the
▲
or
▼
button to select
network
in the
setup
menu, and then press the
EnTER
E
button.
4. On the
network
screen, select
network Type
.
5. Set
network Type
to
Wireless
.
6. Select
network setup
. The
network setup
screen
appears.
7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
9.
After the network connection is set up, press the
RETURn
button to exit the
network setup
screen.
network setup (Auto)
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
Network Setup
Select a network
: Not Selected ►
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
:
Auto
DNS Server
:
A
PBC(WPS)
U
Move
E
Enter
R
Return
BN68-02604B_Eng.indb 26
2010-06-29 �� 10:41:44