![Samsung LN32B460 User Manual Download Page 9](http://html.mh-extra.com/html/samsung/ln32b460/ln32b460_user-manual_345593009.webp)
English -
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Plug the incoming cable into the
ANT IN (CABLE)
terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting to a Cable Box that Descrambles All Channels
.
Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.
.
Connect the other end of this cable to the
ANT IN (CABLE)
terminal on the back of the
TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at
most electronics stores.)
.
Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.
.
Connect this cable to a two-way splitter.
.
Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
.
Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
.
Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
.
Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the
ANT IN (CABLE)
terminal on the rear
of the TV.
After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’
position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
¦
N
N
N
Splitter
Cable Box
Incoming cable
TV Rear
ANT IN (CABLE)
RF (A/B) Switch
ANT IN (CABLE)
ANT IN
ANT OuT
ANT IN (CABLE)
BN68-01919B-Eng.indd 7
2009-04-10 �� 9:58:11