English -
Problem
Possible Solution
The picture appears distorted in the
corner of the screen.
If
Screen Fit
When is selected with some external devices, the picture may
appear distorted in the corner of the screen. This symptom is caused by the
external devices, not TV.
The ‘Resets all settings to the default
values.’ message appears.
This appears when you press and hold the
EXIT
button for a while. The
product settings are reset to the factory defaults.
This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Installing the Stand
Preset
: Place the Guide Stand and Cover Neck onto the stand
and fasten it using the screws. Applicable to 32inch models only.
.
Attach your LCD TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the
stand when attaching it.
To make sure the TV is installed on the stand at a proper
level, do not apply excess downward pressure to the upper
left of right sides of the TV.
.
Fasten screws at position
1
and then fasten screws at position
2
.
Stand the product up and fasten the screws. If you fasten
the screws with the LCD TV placed down, it may lean to one
side.
Disconnecting the Stand
.
Remove four screws from the back of the TV.
.
Separate the stand from the TV.
Two or more people should carry the TV.
.
Cover the bottom hole with the cover.
N
¦
N
N
N
N
N
¦
N
1
2
(LN32B450)
(LN32B460)
BN68-01919B-Eng.indd 33
2009-04-10 �� 9:58:17
