manualshive.com logo in svg

Samsung LN26C350D1D, Service Manual

Share
Download
Samsung LN26C350D1D Service Manual Download Page 42

4-25

4. Troubleshooting

4-2. Alignments and Adjustments

4-2-1. General Alignment Instructions

Usually, a color LCD-TV needs only slight touch-up adjustment upon installation.

 

1. 

Check the basic characteristics such as height, horizontal and vertical sync.
Use the specified test equipment or its equivalent.

2. 

Correct impedance matching is essential.

3. 

Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV.

 

4. 

When inserting signal markers, Do not allow the generator to distort the result.

Connect the TV only to an AC power source with voltage and frequency as specified on the backcover nameplate.

5. 

Do not attempt to connect or disconnect any wire while the TV is turned on.

 

6. 

Make sure  that the power cord is disconnected before replacing any parts.

To protect against shock hazard, use an isolation transformer.

7. 

Summary of Contents for LN26C350D1D






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands