English-13
Turning the TV On and Off
Press the
POWER
button on the remote control.
You can also use the
POWER
button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1.
Press the
POWER
button on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed.
Press the
ENTER
button, then “Select the language of the OSD” menu is
automatically displayed.
2.
Press the
ENTER
button to enter the language.
Press the
or
buttons to select language, then the
ENTER
button.
“Select the antennas to memorize.” menu is automatically displayed.
3.
Press the
or
buttons to memorize the channels of the selected connection.
Press the
ENTER
button to select “Start”.
If the antenna is connected to ANT 1 (AIR), select “Air” and if it is connected to
ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the
or
button, then press the ENTER
button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
4.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the
ENTER
button when channel memorization is complete.
“Select the clock mode.” menu is automatically displayed.
To stop the search before it has finished, press the
ENTER
button with stop selected.
5.
Press the
ENTER
button.
Press the
or
buttons to select “Manual” or “Auto”, then the
ENTER
button.
Switches the Daylight Saving Time function on or off.
Operation
BN68-01001A-01Eng.qxd 2/15/06 7:09 AM Page 13
