Samsung LH75OMREBGB User Manual Download

Page: 47 / 115

Clone Product

HOME

→

Clone Product

→

ENTER

Clone Product

The displayed image may differ depending on the model.

Export settings on the product to an external storage device. You can also import settings from an external storage

device.
This option is useful when assigning the same settings to several products.

When a duplicate file is not found on the external storage device

Connect the external storage device, then run the

Clone Product

function.

The

No cloning file found on the external storage device. Export this device's settings to the external storage

device?

message appears.

Select

Export

to export the settings.

When a duplicate file is found on the external storage device

Connect the external storage device, then run the

Clone Product

function.

The

Cloning file found. Please select an option.

message appears.

Run the

Import from External Storage

Export to External Storage

function.

–

Import from External Storage

: Copy settings saved on an external storage device to the product.

After configuration is complete, the product is rebooted automatically.

–

Export to External Storage

: Copy settings on the product to an external storage device.

Summary of Contents for LH75OMREBGB




















































































































Search results

Summary of Contents for LH75OMREBGB

Reviews:

Related manuals for LH75OMREBGB

Brands by name

Popular brands

Samsung LH75OMREBGB, User Manual

Search results

Summary of Contents for LH75OMREBGB

Reviews:

Related manuals for LH75OMREBGB

Brands by name

Popular brands