Samsung LH65MGPLBF/ZA User Manual Download Page 29

Page: 29 / 125

Note

In HDMI mode, only PCM format audio is supported.

Connecting Using a DVI to HDMI Cable

1. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of

the LCD Display using a DVI to HDMI cable.

2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored

audio output terminals of the digital output device, and connect the opposite jack to the

[DVI / RGB /HDMI AUDIO IN] terminal of the LCD Display.

3. Select HDMI using the SOURCE button on the front of the LCD Display or on the remote

control.

Connecting a DVD Player

1. Connect a set of audio cables between the [AV/COMPONENT AUDIO IN [R-AUDIO-L]]

on the LCD Display and the AUDIO OUT jacks on the DVD player.

Connections

Summary of Contents for LH65MGPLBF/ZA






























































































































Search results

Summary of Contents for LH65MGPLBF/ZA

Reviews:

Related manuals for LH65MGPLBF/ZA

Brands by name

Popular brands

Samsung LH65MGPLBF/ZA, User Manual

Search results

Summary of Contents for LH65MGPLBF/ZA

Reviews:

Related manuals for LH65MGPLBF/ZA

Brands by name

Popular brands