English-45
This enables the user to select from the CAM-provided menu.
1.
Press the
D.MENU
button to display the DTV menu.
2.
Press the
or
button to select "System", then press the
ENTER
button.
3.
Press the
or
button to select "Common Interface",
then press the
ENTER
button.
4.
Select to "CI Menu" by pressing the or button, and press the
ENTER
button.
5.
Select the required option by pressing the
or
button,
and press the
ENTER
button.
6.
Press the
EXIT
button to exit.
Select the CI Menu based on the menu PC Card.
Selecting the CI (Common Interface) Menu
You can reset the values stored to the factory default values.
The Reset operation deletes all channel information and user preferences returning
all values to their default factory state.
1.
Press the
D.MENU
button to display the DTV menu.
2.
Press the
or
button to select "System", then press the
ENTER
button.
3.
Press the
or
button to select "Reset", then press the
ENTER
button.
4.
The "Enter PIN" screen will appear.
5.
Enter your current 4-digit PIN code by using the numeric buttons (0~9).
The warning message is displayed.All values will be reset by pressing the
coloured buttons (red, green, yellow, and blue)in turn.
6.
Press the
EXIT
button to exit.
Resetting
Viewing Common Interface
This contains information on CAM inserted in the CI slot and displays it.
1.
Press the
D.MENU
button to display the DTV menu.
2.
Press the or button to select "System", then press the
ENTER
button.
3.
Press the or button to select "Common Interface",
then press the
ENTER
button.
4.
Press the
ENTER
button to display the information for your application.
5.
Press the
EXIT
button to exit.
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1.
Purchase the CI CAM module by visiting your nearest dealer or by phone.
2.
Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3.
Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4.
Check if you can see a picture on a scrambled signal channel.
BN68-01007N-00Eng.indd 45
BN68-01007N-00Eng.indd 45
2006-08-11
2:57:46
2006-08-11
2:57:46
