Samsung LE32D400E1W Service Manual Download Page 74

Page: 74 / 91

4-46

4. Troubleshooting

4-6. Servicing Information

4-6-1. USB Download Method (Main SW & e-Manual)

Samsung may offer upgrades for TV’s firmware in the future.

Upgrades will be possible by connecting a USB drive to the USB port located on your TV.

Insert a USB drive containing the firmware (

T-MSU4DEUC

)

upgrade into the USB port on the rear of the TV.

Press the

MENU

button to display the menu. Press the

button to select "Support", then press the

ENTER

button.

Press the

button to select "Software Upgrade", then

press the

ENTER

button to select "By USB". The message

"Scanning for USB. It may take up to 1 minute." is displayed.
The message "Upgrade version XXXX to version XXXX?

The system will be reset after upgrade." is displayed.

Press the or

to select the "OK", then press the

ENTER

button.

Please be careful to not disconnect the power or remove the

USB drive while upgrades are being applied. The TV will turn off

and turn on automatically after completing the firmware upgrade.

Please check the firmware version after the upgrades are

complete. When software is upgraded, video and audio settings

you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can

easily reset them after the upgrade.

Summary of Contents for LE32D400E1W




























































































Search results

Summary of Contents for LE32D400E1W

Reviews:

Related manuals for LE32D400E1W

Brands by name

Popular brands

Samsung LE32D400E1W, Service Manual

Search results

Summary of Contents for LE32D400E1W

Reviews:

Related manuals for LE32D400E1W

Brands by name

Popular brands