Samsung LE32D400E1W Service Manual Download Page 64

Page: 64 / 91

4-36

4. Troubleshooting

4-2. Alignments and Adjustments

4-2-1. General Alignment Instuction

Usually, a color LED/LCD TV needs only slight touch-up adjustment upon installation.

Check the basic characteristics such as height, horizontal and vertical sync.
Use the specified test equipment or its equivalent.

Correct impedance matching is essential.

Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV.

When inserting signal markers, do not allow the marker generator to distort test result.

Connect the TV only to an AC power source with voltage and frequency as specified on the backcover nameplate.

Do not attempt to connect or disconnect any wire while the TV is turned on.

Make sure that the power cord is disconnected before replacing any parts.

To protect against shock hazard, use an isolation transformer.

Summary of Contents for LE32D400E1W




























































































Search results

Summary of Contents for LE32D400E1W

Reviews:

Related manuals for LE32D400E1W

Brands by name

Popular brands

Samsung LE32D400E1W, Service Manual

Search results

Summary of Contents for LE32D400E1W

Reviews:

Related manuals for LE32D400E1W

Brands by name

Popular brands