English - 0
Coarse
0
Fine
0
Move
Enter
return
Image lock
Setting the PC
Coarse and Fine tuning of the Image (Image lock):
the purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune
again. after the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
.
Preset: Press the
SourCE
button to select
PC
mode.
.
Press the
MEnu
button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
EntEr
button.
3.
Press the ▲ or ▼ button to select “PC”, then press the
EntEr
button.
.
Press the
EntEr
button to select “Image Lock”.
.
Press the ▲ or ▼ button to select “Coarse” or “Fine”, then press the
EntEr
button.
.
Press the ◄ or ► button to adjust the screen quality.
Press the
EntEr
button.
.
Press the
ExIt
button to exit.
Changing the Image Position (Position):
adjust the PC’s screen positioning if it does not fit the tV screen.
.
Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
.
Press the ▲ or ▼ button to select “Position”, then press the
EntEr
button.
3.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the
EntEr
button.
.
Press the
ExIt
button to exit.
Initializing the Image Settings (Image reset):
You can replace all image settings with the factory default values.
.
Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
.
Press the ▲ or ▼ button to select “Image Reset”, then press the
EntEr
button.
3.
Press the
ExIt
button to exit.
adjusting the PC Screen automatically (auto adjustment):
auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal. the values of fine, coarse and position
are adjusted automatically.
.
Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
.
Press the ▲ or ▼ button to select “Auto Adjustment”, then press the
EntEr
button.
3.
Press the
ExIt
button to exit.
adjust
Enter
return
Position
Move
Enter
return
Image lock
Position
Image reset
auto adjustment
PC
Move
Enter
return
Image lock
Position
Image reset
auto adjustment
PC
BN68-1177N-Eng-0824.indd 20
2007-08-24 �� 4:04:51
