background image

37

English

05

Other Information

Issues

Solutions and Explanations

Your settings are lost after 30 minutes or 
every time the TV is turned off.

If the TV is in the 

• 

Store Demo

 mode, it will reset audio and picture settings every 30 minutes. Change 

the settings from 

Store Demo

 mode to 

Home Use

 mode in the 

Plug & Play

 (Initial setup) procedure. 

Press the 

SOURCE

 button to select 

TV

 mode, and go to 

MENU

 

 

Setup

 

 

Plug & Play

 (Initial 

setup) 

 

ENTER

E

.

You have intermittent loss of audio or 
video.

Check the cable connections and reconnect them. 

• 

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are 

• 

flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 
degree connectors.

You see small particles when you look 
closely at the edge of the frame of the TV.

This is part of the product’s design and is not a defect.

• 

The 

PIP

 menu is not available.

PIP

• 

 functionality is only available when you are using a HDMI, PC or components source.

The message “Scramble signal” or “Weak 
Signal/No Signal” appears.

If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

• 

If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.

• 

You turned the TV off 45 minutes ago, and 
it turned on again.

It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware 

• 

downloaded whilst your watching TV.

There are recurrent picture/sound issues.

Check and change the signal/source.

• 

A reaction may occur between the rubber 
cushion pads on the base stand and the 
top finish of some furniture.

To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

• 

This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, 

 

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the 
product.

Licence

 

¦

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are 
trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are 
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. 
Product Includes software. © DTS, Inc. All Rights Reserved.

DivX Certified to play DivX video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX

®

 is a digital video format created by DivX,Inc. This is an official DivX Certified device that 

plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. 
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified

®

 device must be registered in order to play DivX Video-on-

Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.  
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.  
Pat. 7,295,673;7,460,688; 7,519,274

Open source license notice

In the case of using open source software, Open Source Licenses are available on the product menu.

BN68-02729A_Eng.indb   37

2/23/2010   4:30:51 PM

Summary of Contents for LA22C450










































Reviews: