Samsung iPolis SNV-7080R User Manual Download Page 58

Page: 58 / 124

setup screen

BLc Setup

You can specify a desired area on the video manually and set the area to be displayed

more clearly.

Select <

Backlight

Set <

mode

> to <

BLc

Set <

BLc level

You can change the level to adjust the

brightness of the monitoring area.

Set the <

top, Bottom, Left, right

levels to specify the target area.

HLc (Highlight compensation) Setup

When a strong light such as streetlamp or headlight faces forward to the camera, you can

mask that exposed area in order to protect it from being saturated.

Select <

Backlight

Set <

mode

> to <

HLc

Set the <

HLc level

> and the <

mask

tone

•

HLC level : Adjust the brightness

level so as to remove the incoming

highlight from a specific condition.

•

Mask tone : Adjust the mask tone of

the highlighted area.

At night operation, this function will be activated only if the incoming highlight exceeds a certain

area in a low contrast environment.

At night, HLC will not function if the scene is either too bright or too dark.

The backlight function is not available while in IR mode.

58_

setup screen

Summary of Contents for iPolis SNV-7080R





























































































































Search results

Summary of Contents for iPolis SNV-7080R

Reviews:

Related manuals for iPolis SNV-7080R

Brands by name

Popular brands

Samsung iPolis SNV-7080R, User Manual

Search results

Summary of Contents for iPolis SNV-7080R

Reviews:

Related manuals for iPolis SNV-7080R

Brands by name

Popular brands