manualshive.com logo in svg

Samsung iPolis SNM-128S, User Manual

Share
Download
Samsung iPolis SNM-128S User Manual Download Page 53

 

User's Manual 

 

52

The main Configuration Tools screen is as shown in the picture above, consisting of Site Tree, 

Menu, and the Settings page.

 

 

4.2.1 Site 

Tree 

Units displayed in the site tree are the ones registered in My Unit in the SNM-128S Main View; 

they cannot be added, deleted, or edited in Configuration Tools.

 

 

The unit list is synchronized to My Unit in the SNM-128S Monitor program on a regular basis. To 

refresh the list immediately, click Refresh at the bottom of the window.

 

 

Clicking on a unit displays available settings menus in the Menu area and the system settings 

page in the Settings page.

 

 

4.2.2 Menu 

Menus in the Menu window vary depending on the product model. Clicking on a menu displays 

the settings of the menu in the Settings page.

 

 

4.2.3 Settings 

Page 

Changing settings parameters in the Settings page enables the "Apply" button at the bottom of 

the window. Make your changes and then click the button to apply the changes.

 

 

Please remember that any changes made in the Settings page will not be saved unless the 

"Apply" button is clicked.

 

 

If you do not click the "Apply" button and attempt to move to a different settings menu, a 

message window will prompt you to apply the changes before navigating away.

 

 

Summary of Contents for iPolis SNM-128S














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands