Figure 2
•
We have two (2) small Phillips screws that need to be removed - located in orange in Figure 3. Use a safe open
pry tool to release the four (4) pop connectors (red) on the motherboard.
Figure 3
•
You can now ease off the motherboard carefully, being sure not to rip any cables.
•
Now, use a heat gun or hair dryer to warm the adhesive holding the screen assembly to the front housing. Use
medium heat on the front of the screen, consistently moving around the screen edges. This should take no longer
than 1 minute.
•
Use a safe open pry tool to release the screen assembly from the housing. Reheat if the adhesive is still strong.
•
Remove the screen from the housing and replace.
Your Samsung Infuse is now disassembled and ready for replacement of part(s). Reverse the
instructions above to reassemble your Infuse.
Notice:
Repairs Universe's guides are for
informational purposes only
. Please
click here for details
.
