Samsung
i
DCS500
DCS (Euro) Keyset User Guide
– 10 –
ANSWERING AN OUTSIDE CALL
§
Lift the handset and you are automatically connected to the ringing call.
in the section “Customising Your Keyset.”)
OR
Press the
ANS/RLS
key to automatically answer on the speakerphone.
Note: If a call is flashing at your keyset, but not ringing, you must press the flas h-
ing CALL key to answer.
UNIVERSAL ANSWER (UA) DEVICE
Outside lines can ring over the paging system or to a loud ringer. To answer
ringing calls dial
67
or press the
UA
key. The UA device can operate in Day
or Night mode and in any one of six different ring plans.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key before dialling.
RECALL DIAL TONE
§
Press the
NEW
key to disconnect your existing call, wait for dial tone
and then make a new call on the same line.
Note: If the
NEW
key does not appear on your keyset, the
FLASH
key may be pro-
grammed to recall dial tone.
SENDING A FLASH
While on an outside call, press the programmed
FLASH
key to send a flash
to the telephone company. This is required for some custom calling features
or CENTREX use (e.g. for nuisance calls).
Note: Flash is not available on ISDN circuits.
