Samsung iDCS 100, User Instructions

Page: 143 / 155

30 29
PROGRAMMING ACCOUNT CODES
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0–9).
UP & DOWN - Used to select entry number.
FLASH & TRSF - Used to view and change only the used entries.
SPK/RLS - Used to clear data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 708
ACCOUNT CODE
Display shows
(001)
2. Dial the account code entry (e.g., 005 )
ACCOUNT CODE
OR press UP or DOWN to select the
(005)
entry number and press the right soft
key to move the cursor
3. Enter the account code via the dial pad,
ACCOUNT CODE
e.g., 1234 (maximum of 12 digits) and
(005)123456789012
press the right soft key to move the
cursor back to step 2
4. Press TRSF to store and exit pro-
gramming OR press SPK to store and
advance to the next program
STATION TIMERS
Each station can have five timers customized for them to accomodate sta-
tion users with individual work habits. These timers are as follows:
NO ANS FWD No Answer Forward
This is the amount of time a call will ring at a station before it forwards to the
Forward No Answer destination. The default is 15 seconds and the range is
000 to 250 seconds. Make sure that this timer is not set to a greater value
than the transfer recall timer or transferred calls will not forward.
DTMF DUR. DTMF Duration
This is the duration of DTMF tones sent to an analog voice mail port. The
default duration is 100 milliseconds and the range is 0100 to 9900 millisec-
onds.
F-DGT DELY First Digit Delay
This is the time the system will wait before sending DTMF digits to a voice
mail port. The default time is 600 milliseconds and the range is from 100 to
9900 milliseconds.
OFFHK SEL. Off Hook Select
This timer controls the delay between going off hook (lifting the handset) and
the off hook select destination being called. The default duration is 10 sec-
onds and the range is from 000 to 250 seconds.
EFWD DELAY External Forward Delay
This is the time that a station will ring before a call forwards to the external
call forward destination. The default duration is 10 seconds and the range is
1 second to 250 seconds.
Open customer programming and follow the instructions below.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
SPK/RLS - Save data and advance to next program.
ACTION DISPLAY
1. Press TRSF and then dial 502
[201] NO ANS FWD
Display shows
010 SEC
HOME PAGE Table of Contents
Guide-Contents