ENG - 14
(Sound Control)
By pressing the button, you can set the audio function. The desired item can be adjusted using the
Up
/
Down
buttons.
Each time the mode changes, the Multicolor LED blinks in white.
LED
Indicator
White Blinks X1
“
SpaceFit Sound
”
“
Active Voice Amplifier
”
“
Voice enhancement
”
“
Night
mode
”
“
Sync
”
“
Virtual
”
– Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound for each
frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the
Left/
Right
buttons and each can be adjusted to a setting between -6 to +6 using the
Up/Down
buttons.
(Make sure the Sound mode is set to "
Standard
".)
– “
Voice enhancement
” makes it easier to hear spoken dialog in movies and TV.
– “
Night mode
” is optimized for night time viewing with the settings adjusted to bring the volume
down but keep the dialog clear.
– If the video on the TV and audio from the Soundbar are not synchronized, select “
Sync
” in Sound
Control, and then set the audio delay between 0~300 milliseconds by using the
Up/Down
buttons.
– “
Sync
” is only supported for some functions.
– The “
Virtual
” function can be turned On/Off by using the
Up/Down
buttons.
Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
•
Until pairing is complete, the Multicolor LED changes as
Red
→
Green
→
Blue
in turn.
LED
Indicator
Red
→
Green
→
Blue Blinks
Pairing
Connection is complete
Cyan
Blinks X3
“
Ready to connect via Bluetooth.
”
p
(Play / Pause)
You can also play or pause music by pressing the button.
15 / 54
14 / 52
15 / 54
